do not scale from this print tfssx-xx-xxx-xx-xx.xx-x-xxx no of positions -02 thru -30 -s: single end (use dwlx-09-xx-s-xx.xx-xx) -d: double end (use dwlx-09-xx-d-xx.xx-xx) (must choose from -nxx options) -t: transfer end (see sheet 2 and 4) (use dwlx-09-xx-t-xx.xx-xx) (must choose from -nxx options) -tr: transfer end w/ retention latch (see sheet 2 and 4)(use dwlx-09-xx-t-xx.xx-xx) (must choose from -nxx options) plating specification -h: heavy gold (use dwlx-09-xx-x-xx.xx-h) -g: light gold (use dwlx-09-xx-x-xx.xx-g) -gf: flash gold (use dwlx-09-xx-x-xx.xx-gf) wire gauge (awg) -28 -30 end option -nus: notch up, straight (pin 1 to pin 1) -nds: notch down, straight (pin 1 to pin 7) -nxx option (end 2) (only available with -d, -t, or -tr) specify in inches [use dwlx-09-xx-x-xx.xx-xx] (single end: 03.00 inch [76.2mm] minimum, double end: 03.25 inch [82.6mm] minimum) assembled length * * .562 14.26 ref .238 6.05 ref "a" "a" tfss-xx-s-s fig. 1 -s: single end (tfssx-07-28-xx-xx.xx-s shown) (no of pos x .050[1.27]) + .120[2.54] ref .110 2.79 ref .175 4.45 ref .102 2.59 ref .375 9.53 ref .190 4.83 ref .050 1.27 ref 01 d xx.xx (see note 10) section "a"-"a" c1 dwlx-09-xx-xx-s-xx.xx-xx c leave blank for all black wire, c: color coded wire, see color sequence table, sheet 2 (see note 11) color code fep cable option -t: fep (leave blank for standard pvc insulation *must choose from -nxx options sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: .050[1.27] socket discrete cable assembly by: tfssx-xx-xxx-xx-xx.xx-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing gaynor 6/13/2008 4 1 sheet scale: 2:1 insulator: lcp, color: black contact: becu cable insulation: pvc wire: tinned copper f:\dwg\misc\mktg\tfssx-xx-xxx-xx-xx.xx-x-xxx-mkt.slddrw notes: 1. represents a critical dimension. 2. minimum pullout force: 3 lbs [13.3 n]. 3. contact must be inserted until retention feature locks into place. 4. all finished goods are to be electical tested including hi-pot test at 300 v. after final electrical test, label each assembly with 1 label-et. 5. tinned copper wire is rohs compliant. 6. parts to be layer packaged. 7. end of discrete wire must be in the range after crimp. 8. for crimp dimensions see dwl-09-xxx-x-xx.xx-xx for pvc applications or dwlt-09-xx-x-xx.xx-xx-xx for fep applications. 9. end of discrete wire must be in range after crimp. 10. for lengths less than 12 in, tolerance shall be .125[3.18]. for other lengths, tolerances shall be 2%. 11. does not apply to fep cable. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 c4 c5 revision d
xx.xx (see note 10) fig.3 *-t:transfer end (tfssx-07-28-x-xx.xx-t-nus shown) (same as fig. 1, unless otherwise stated) c3 tfss-xx-s-s isdf-xx-s xx.xx (see note 10) fig. 2 *-d: double end (tfssx-07-28-x-xx.xx-d-nus shown) (same as fig. 1, unless otherwise stated) c2 isdf-xx-s xx.xx (see note 10) fig.4 *-t:transfer end (tfssx-07-28-x-xx.xx-tr-nus shown) (same as fig. 1, unless otherwise stated) (only available in -05 thru -03 pos) c4 tfss-xx-s-s isdf-xx-s sheet of .050[1.27] socket discrete cable assembly by: tfssx-xx-xxx-xx-xx.xx-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing gaynor 6/13/2008 4 2 sheet scale: 2:1 revision d f:\dwg\misc\mktg\tfssx-xx-xxx-xx-xx.xx-x-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
01 07 07 01 notch end 2 notch end 1 -nus (end 2 notch up, cable straight) (pin 1 to pin 1) notch end 2 notch end 1 -nds (end 2 notch down, cable straight) (pin 1 to pin 7) 01 07 01 07 d d d d sheet of .050[1.27] socket discrete cable assembly by: tfssx-xx-xxx-xx-xx.xx-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing gaynor 6/13/2008 4 3 sheet scale: 1.75:1 revision d f:\dwg\misc\mktg\tfssx-xx-xxx-xx-xx.xx-x-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
notch end 2 notch end 1 t-nus (end 2 notch up, cable straight) (pin 1 to pin 7) 07 01 01 07 notch end 1 notch end 2 t-nds (end 2 notch down, cable straight) (pin 1 to pin 1) 07 01 07 01 tr-nus (end 2 notch up, cable straight) (pin 1 to pin 7) notch end 1 notch end 2 01 07 07 01 d notch end 1 notch end 2 tr-nds (end 2 notch down, cable straight) (pin 1 to pin 1) 07 01 07 01 d d d d d d d sheet of .050[1.27] socket discrete cable assembly by: tfssx-xx-xxx-xx-xx.xx-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing gaynor 6/13/2008 4 4 sheet scale: 2:1 revision d f:\dwg\misc\mktg\tfssx-xx-xxx-xx-xx.xx-x-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
